How to Maintain a Power Bank

1.Don’t wait until the battery is completely dead to recharge

Try to keep the battery power near the half full state. The smaller the range of charging and discharging, the better. So, usually the best use habit should be the use of 50% of the power after charging. Although the number of charging increased but compared to the total amount of light on the battery cell damage is lower.

2.the charging bank will also be afraid of cold and heat, should pay attention to the use of temperature

The operating temperature of the carp electric is 0-55°. When the external temperature is too low, the battery will not work stably and discharge is not sufficient. High temperatures, in turn, shorten the life of electronics, damage batteries and age certain plastics. These problems are concentrated in the winter and summer, but the border areas are also noteworthy for their extreme weather. In daily life, the car is a relatively closed environment, because the convection is poor. If the charging bank outside the state of charge and discharge is placed inside. It is easy to cause local high temperature and cause explosion

3.Avoid discharging while charging

The problem of discharging while charging mainly lies in the high load of the circuit board and the high temperature in a short time. Which affects the performance and safety. In addition, when we see that the nominal input value of the mobile power supply is 5V/1A, and the output value is 5V/2.1A, it is easy to make ends meet, and the internal parts of the charging bank are great damage.

4.waterproof.

To be clear, the power bank is not waterproof, so it is easy to make the product unusable once it is flooded. In daily life, because of wet weather, accidentally fall into the water, or use a wet cloth for cleaning, it is easy to let the mobile power supply water, resulting in leakage, short circuit or other failures.