How to solve the charging bank fault

1.No power:

If the power bank can not boot, the first thing you should think of is that the power bank is running out. The power bank has no internal power to support the boot work, this time should be used to charge the power bank. If the power bank is not broken, it should turn on after about ten minutes of charging.

2.Boot method is not right:

But if you still can’t open the machine, check whether the boot method is correct. Many charging treasure is to press the open key can be switched on, there are also some novel charging treasure using a shake to detect the design of power. Here to remind you, now a lot of charging bank is no need to turn on the plug in the device can automatically charge. And full of electricity will automatically shut down, there is no need to switch the machine, very intelligent.

3.Poor contact or internal failure:

If you still can’t boot it may be the joint contact is not good for charging bank into the electricity. Or is the internal fault of the charge bank, at this time should apply for after-sales service to the business, do not open the charge bank to check. It is very easy to cause the occurrence of accidents such as spontaneous combustion of the charge bank.

4.Poor contact:

If the power bank shows that there is electricity but it cannot charge the digital equipment. First consider the connection of the charging cable poor contact. In order to save costs, the quality of the charging bank as a gift is often not so good. After a long time of use may appear bad contact, you can change a charging cable to try whether it can charge normally.

5.Output fault:

If you change the charging bank or can not charge for digital equipment. And direct charge using the same charging line can charge digital equipment. It is very likely that the output of the charging bank is faulty. This time it is also recommend that we apply for after-sales service to businesses, do not dismantle and repair themselves.